285/40R22 Tire Size in Inches

Diameter, width, sidewall and the closest equivalent sizes, computed from the size code.

285/40R22
31.0" tall × 11.2" wide
On a 22-inch wheel · roughly 31.0x11.2R22 in flotation sizing
MeasurementInchesMillimetres
Overall diameter30.98787
Section width11.22285
Sidewall height4.49114.0
Wheel diameter22559
Circumference97.32472
Revolutions per mile651 (405 per km)

What 285/40R22 means

285 is the section width in millimetres (11.2 in). 40 is the aspect ratio: the sidewall is 40% as tall as the tire is wide, which works out to 114.0 mm or 4.5 in. R22 is a radial tire for a 22-inch wheel.

Overall diameter is the wheel plus two sidewalls: 22 + 2 × 4.49 = 31.0 inches. These are the nominal dimensions every maker builds to; a real 285/40R22 can measure a few tenths of an inch differently by model and inflation.

Closest equivalent sizes

Common sizes within the usual 3% of 285/40R22's overall diameter. Confirm load index, speed rating and rim width before swapping.

SizeDiameterWidthChangeSpeedometer at 60
275/60R18 new wheels 31.0 in 10.8 in +0.1% really 60.0 mph
275/55R19 new wheels 30.9 in 10.8 in -0.2% really 59.9 mph
255/55R20 new wheels 31.0 in 10.0 in +0.2% really 60.1 mph
255/65R18 new wheels 31.1 in 10.0 in +0.2% really 60.1 mph
255/70R17 new wheels 31.1 in 10.0 in +0.3% really 60.2 mph
275/65R17 new wheels 31.1 in 10.8 in +0.3% really 60.2 mph

Speedometer if you switch to 275/60R18

Your speedometer stays calibrated for 285/40R22. With a taller tire you travel faster than it shows.

Speedometer readsTrue speed
30 mph30.0 mph
45 mph45.0 mph
55 mph55.0 mph
65 mph65.0 mph
75 mph75.0 mph
Compare 285/40R22 with any size →

Shop 285/40R22 tires

Check the load index and speed rating on your door-jamb placard before you buy, especially for LT tires used for towing.

See 285/40R22 tires on Amazon →

As an Amazon Associate we earn from qualifying purchases.

Frequently Asked Questions

A 285/40R22 tire is 31.0 inches (787 mm) tall overall. That is the 22-inch wheel plus two sidewalls of 4.5 inches each (40% of the 285 mm section width). Expect a real tire to measure within a few tenths of an inch of this, depending on the model and inflation.

The section width is 285 mm, or 11.2 inches, measured sidewall to sidewall on the recommended rim width. The tread itself is narrower than that. In flotation sizing, 285/40R22 is roughly a 31.0x11.2R22.

275/60R18 is the closest common size, at +0.1% overall diameter (31.0 in against 31.0 in). Most makers treat about 3% as the limit for a swap without speedometer or clearance problems, but always confirm load index, speed rating and wheel width before changing size.

About 651 revolutions per mile (405 per kilometre), from its 31.0-inch rolling diameter. Real-world figures run slightly higher because a loaded tire squats. This number is what your speedometer and odometer are calibrated against.

Last updated: October 2, 2026

Compare any sizes

The full calculator compares up to three sizes with speedometer error, clearance change and a to-scale diagram.

Open the tire size calculator

Other 22-inch sizes

265/40R22 275/40R22 285/45R22 305/40R22 255/30R22 265/35R22 285/35R22 295/30R22 305/45R22