295/70R18 Tire Size in Inches

Diameter, width, sidewall and the closest equivalent sizes, computed from the size code.

295/70R18
34.3" tall × 11.6" wide
On a 18-inch wheel · roughly 34.3x11.6R18 in flotation sizing
MeasurementInchesMillimetres
Overall diameter34.26870
Section width11.61295
Sidewall height8.13206.5
Wheel diameter18457
Circumference107.62734
Revolutions per mile589 (366 per km)

What 295/70R18 means

295 is the section width in millimetres (11.6 in). 70 is the aspect ratio: the sidewall is 70% as tall as the tire is wide, which works out to 206.5 mm or 8.1 in. R18 is a radial tire for a 18-inch wheel.

Overall diameter is the wheel plus two sidewalls: 18 + 2 × 8.13 = 34.3 inches. These are the nominal dimensions every maker builds to; a real 295/70R18 can measure a few tenths of an inch differently by model and inflation.

Closest equivalent sizes

Common sizes within the usual 3% of 295/70R18's overall diameter. Confirm load index, speed rating and rim width before swapping.

SizeDiameterWidthChangeSpeedometer at 60
315/70R17 new wheels 34.4 in 12.4 in +0.3% really 60.2 mph
275/65R20 new wheels 34.1 in 10.8 in -0.5% really 59.7 mph
295/60R20 new wheels 33.9 in 11.6 in -0.9% really 59.4 mph
285/65R20 new wheels 34.6 in 11.2 in +1.0% really 60.6 mph
315/75R16 new wheels 34.6 in 12.4 in +1.0% really 60.6 mph
285/75R17 new wheels 33.8 in 11.2 in -1.3% really 59.2 mph

Speedometer if you switch to 315/70R17

Your speedometer stays calibrated for 295/70R18. With a taller tire you travel faster than it shows.

Speedometer readsTrue speed
30 mph30.1 mph
45 mph45.1 mph
55 mph55.2 mph
65 mph65.2 mph
75 mph75.2 mph
Compare 295/70R18 with any size →

Shop 295/70R18 tires

Check the load index and speed rating on your door-jamb placard before you buy, especially for LT tires used for towing.

See 295/70R18 tires on Amazon →

As an Amazon Associate we earn from qualifying purchases.

Frequently Asked Questions

A 295/70R18 tire is 34.3 inches (870 mm) tall overall. That is the 18-inch wheel plus two sidewalls of 8.1 inches each (70% of the 295 mm section width). Expect a real tire to measure within a few tenths of an inch of this, depending on the model and inflation.

The section width is 295 mm, or 11.6 inches, measured sidewall to sidewall on the recommended rim width. The tread itself is narrower than that. In flotation sizing, 295/70R18 is roughly a 34.3x11.6R18.

315/70R17 is the closest common size, at +0.3% overall diameter (34.4 in against 34.3 in). Most makers treat about 3% as the limit for a swap without speedometer or clearance problems, but always confirm load index, speed rating and wheel width before changing size.

About 589 revolutions per mile (366 per kilometre), from its 34.3-inch rolling diameter. Real-world figures run slightly higher because a loaded tire squats. This number is what your speedometer and odometer are calibrated against.

Last updated: October 2, 2026

Compare any sizes

The full calculator compares up to three sizes with speedometer error, clearance change and a to-scale diagram.

Open the tire size calculator

Other 18-inch sizes

215/45R18 215/50R18 215/55R18 225/40R18 225/45R18 225/50R18 225/55R18 225/60R18 235/40R18 235/45R18 235/50R18 235/55R18 235/60R18 235/65R18 245/40R18 245/45R18 245/50R18 245/60R18 245/65R18 255/35R18 255/45R18 255/55R18 255/60R18 255/65R18 255/70R18 265/35R18 265/60R18 265/65R18 265/70R18 275/65R18 275/70R18 285/65R18 285/75R18 275/40R18 275/60R18 285/60R18