205/75R14 Tire Size in Inches
Diameter, width, sidewall and the closest equivalent sizes, computed from the size code.
| Measurement | Inches | Millimetres |
|---|---|---|
| Overall diameter | 26.11 | 663 |
| Section width | 8.07 | 205 |
| Sidewall height | 6.05 | 153.8 |
| Wheel diameter | 14 | 356 |
| Circumference | 82.0 | 2083 |
| Revolutions per mile | 773 (480 per km) | |
What 205/75R14 means
205 is the section width in millimetres (8.1 in). 75 is the aspect ratio: the sidewall is 75% as tall as the tire is wide, which works out to 153.8 mm or 6.1 in. R14 is a radial tire for a 14-inch wheel.
Overall diameter is the wheel plus two sidewalls: 14 + 2 × 6.05 = 26.1 inches. These are the nominal dimensions every maker builds to; a real 205/75R14 can measure a few tenths of an inch differently by model and inflation.
Closest equivalent sizes
Common sizes within the usual 3% of 205/75R14's overall diameter. Confirm load index, speed rating and rim width before swapping.
| Size | Diameter | Width | Change | Speedometer at 60 |
|---|---|---|---|---|
| 225/40R19 new wheels | 26.1 in | 8.9 in | -0.1% | really 60.0 mph |
| 215/60R16 new wheels | 26.2 in | 8.5 in | +0.2% | really 60.1 mph |
| 255/35R19 new wheels | 26.0 in | 10.0 in | -0.3% | really 59.8 mph |
| 215/65R15 new wheels | 26.0 in | 8.5 in | -0.4% | really 59.8 mph |
| 195/65R16 new wheels | 26.0 in | 7.7 in | -0.5% | really 59.7 mph |
| 225/45R18 new wheels | 26.0 in | 8.9 in | -0.5% | really 59.7 mph |
Speedometer if you switch to 225/40R19
Your speedometer stays calibrated for 205/75R14. With a shorter tire you travel slower than it shows.
| Speedometer reads | True speed |
|---|---|
| 30 mph | 30.0 mph |
| 45 mph | 45.0 mph |
| 55 mph | 55.0 mph |
| 65 mph | 65.0 mph |
| 75 mph | 74.9 mph |
Shop 205/75R14 tires
Check the load index and speed rating on your door-jamb placard before you buy, especially for LT tires used for towing.
See 205/75R14 tires on Amazon →As an Amazon Associate we earn from qualifying purchases.
Frequently Asked Questions
Last updated: October 2, 2026